FT

Single Row
Product Preview

  • Roller
This model has a single row of rollers and are mainly used on the flat surface.
View specifications and model number coding
Width (mm)
See more
Please Log In to see pricing

Don't have an account? Sign up here.

Subtotal: $0.00
  • Model No. Main dimensions Roller dimensions No.
    of
    rollers
    Z
    Basic load rating Mass
    Width
    b
    Length
    l
    Length
    B
    Diameter
    Da
    Pitch
    P
    Dynamic
    C
    Static
    C0
    mm mm mm mm mm kN kN g
    FT2010-32L103227.8 4 7 5.210.41.9
    FT2515-45L15452.511.8 4.75 7 10.925.25.6
    FT3020-60L2060315.8 5.51 8 17.442.812.5
    FT3525-75L25753.519.8 7 8 27.472.723
    FT4030-150L30150425.8 7.3 1855.717673
    FT4035-150L35150430.8 7.3 1864.221286
    FT4026V-150L261502.82822.8 6 2245.115545
    FT5038-250L38250532.8 11 21109387195
    FT5043-250L43250537.8 11 21122449200
    FT5030V-250L302503.53521.8 7 3378290103
    FT10054-400L544001046 15.8 242791000870
    FT10080-500L805001071.8 16 2945919001610
    FT10060V-500L605007.07152.813.5 353011270870
    For more detailed specifications, please download the Product Catalog with the link in the Downloads section of this product page.
  • Model Size*1 Length*1
    FT 2010 - 32L
    FT Various Length in millimeters then "L"
    Note 1: see the Specifications tab for standard sizes and lengths


    Example of combinations

    90°V surface Flat surface
    Model No. Roller diameter
    Da
    Model No. Roller diameter
    Da
    FTW 4030V 2.828 FT 4030 4
    FTW 4030V 2.828 FT 4035 4
    FTW 5035V 3.535 FT 5038 5
    FTW 5035V 3.535 FT 5043 5
    FTW 5045 5 FT 10060V 7.071
    FTW 5050 5 FT 10060V 7.071
    FTW 10070V 7.071 FT 10080 10
    Note) The roller diameter (Da) for model numbers containing symbol V at the end represents the value 1/√2 times that of types for the same model number with no symbol. The diameter of the roller to be combined with 90°V surface will be 1/√2 times that of the roller on the flat surface. For example, when using model FT4035 (roller diameter: Ø4) on the flat surface, use model FTW4030V (roller diameter: Ø2.828) on the V surface. Performance of the Flat Roller is significantly affected by the contact state of the upper and lower raceways. You can check the fit before installing the Flat Roller by designing the raceways as indicated in the figure above.