| Model No. | Outer dimensions | LM Block dimensions | H3 | H2 | W3 | Basic load rating | Static Permissible Moment N-M | Mass kg | Radial | MA | MB | MC | |||||||||||||
| Height M |
Width W |
Length L |
B | C | S x l | L1 | T | K | N | E | Greasing hole d |
Greasing nipple | Dynamic C |
Static C0 |
1 Block | Double Block |
1 Block | Double Block |
1 Block | ||||||
| kN | kN | ||||||||||||||||||||||||
| RSX7WM | 9 | 25 | 31 | 19 | 10 | M3x 2.8 | 20.4 | --- | 7 | 1.8 | --- | 1.2 | --- | 2 | 5.5 | --- | 1.63 | 2.51 | 8.08 | 46.9 | 9.32 | 54.2 | 18.5 | 0.018 | |
| RSX9WM | 12 | 30 | 39 | 21 | 12 | M3 x 2.8 | 27 | --- | 8.3 | 2.3 | --- | 1.6 | --- | 3.7 | 6 | --- | 2.8 | 4.28 | 18.5 | 99.3 | 21.4 | 115 | 40.5 | 0.035 | |
| RSX12WM | 14 | 40 | 44.5 | 28 | 15 | M3 x 3.5 | 30.9 | 4.5 | 10 | 3 | --- | 2 | --- | 4 | 8 | --- | 4.46 | 6.31 | 30 | 171 | 30 | 171 | 79.2 | 0.075 | |
| RSX15WM | 16 | 60 | 55.5 | 45 | 20 | M4 x 4.5 | 38.9 | 5.6 | 12 | 3 | 4 | --- | PB107 | 4 | 9 | 23 | 7.43 | 10.1 | 61.4 | 343 | 61.4 | 343 | 211 | 0.17 | |
| Model | Size | Block Type | Seal Type*1 | |
| RSX | 12 | WM | UU | BLOCK |
| RSX | 7 | WM | UU | |
| 9 | ||||
| 12 | ||||
| 15 |
Note 1: Contamination protection seal UU is standard for Model SRS UU = end seals
The above selections are
Online Store standards. If you need a
selection that differs from the standard, please contact us at [email protected]