Toggle Nav

Cam Followers

The Cam Follower is a compact bearing with a high-rigidity shaft and a built-in needle bearing. Most suitable as a guide roller for cam mechanisms and linear motion of automated machines and dedicated machines.
Cam Followers
Hide Filters Show Filters
Shopping Options
Type Clear
  1. show 1 more show less
Model Clear
  1. show 1 more show less
Installation Method Clear
Outer Diameter (mm) Clear
  1. show 16 more show less
Outer Ring Width (mm) Clear
  1. show 10 more show less
  1. CF-AB
    CF-AB
    Hexagon Socket on Both Ends
    Grease Nipple Built-In Type
    (Stud Dia. 12 - 30 mm)
  2. CF-M-AB
    CF-M-AB
    Stainless Steel CF-AB Type
    (Stud Dia. 12 - 20 mm)
  3. CF
    CF
    Driver Groove on Stud Head
    (Stud Dia. 5 - 10 mm)
  4. CF-M
    CF-M
    Stainless Steel CF Type
    (Stud Dia. 5 - 10 mm)
  5. CF-A
    CF-A
    Hexagon Socket on Stud Head
    (Stud Dia. 3 - 10 mm)
  6. CF-M-A
    CF-M-A
    Stainless Steel CF-A Type
    (Stud Dia. 3 - 10 mm)

Eccentric Type (CFH)

Because there is an eccentricity of 0.25 to 1.0 mm between the mounting shaft of the stud and the stud head, slight positioning adjustments can easily be made simply by rotating the stud. This eliminates the need to align the cam follower with the cam groove or perform precision machining on the mounting hole, greatly reducing the time and labor required for machining and assembly.

  1. CFH-AB
    CFH-AB
    Hexagon Socket on Both Ends
    Grease Nipple Built-In Type
    (Stud Dia. 12 - 30 mm)
  2. CFH-M-AB
    CFH-M-AB
    Stainless Steel CFH-A Type
    (Stud Dia. 12 - 20 mm)
  3. CFH
    CFH
    Driver Groove on Stud Head
    (Stud Dia. 6 - 10 mm)
  4. CFH-M
    CFH-M
    Stainless Steel CFH Type
    (Stud Dia. 6 - 10 mm)
  5. CFH-A
    CFH-A
    Hexagon Socket on Stud Head
    (Stud Dia. 5 - 10 mm)
  6. CFH-M-A
    CFH-M-A
    Stainless Steel CFH-A Type
    (Stud Dia. 6 - 10 mm)

Compact Type (CFS)

This Cam Follower contains extremely fine needle rollers. The outer ring external diameter is extremely small relative to the stud diameter, allowing a compact design.

  1. CFS-A
    CFS-A
    Hexagon Socket on Stud Head
    (Stud Dia. 2.5 - 6 mm)
  2. CFS-M-A
    CFS-M-A
    Hexagon Socket on Stud Head
    Stainless Steel
    (Stud Dia. 2.5 - 6 mm)
  3. CFS-V-A
    CFS-V-A
    Hexagon Socket on Stud Head
    Full Roller Type
    (Stud Dia. 2.5 - 6 mm)

Easy-Mounting Type (CF-SFU)

For easy mounting, the stud is equipped with a slot enabling it to be secured with a screw. This greatly reduces the time and labor required for installation and is ideal for applications where there is no space to secure the stud with a nut.

  1. CF-SFU
    CF-SFU
    Slot on Stud to be Secured with a Screw
    (Stud Dia. 6 - 20 mm)

With a Tapped Grease Hole (CFT)

Basically the same as the basic type Cam Follower, this model is provided with tapped holes for piping on the stud head and the thread. It is optimal for locations where an integrated piping for greasing is required.

  1. CFT
    CFT
    Tapped Grease Holes on Both Ends
    (Stud Dia. 6 - 30 mm)

With Thrust Balls (CFN)

On the inside, this Cam Follower model is equipped with thrust-load ball bearings. This effectively prevents friction and wear on the slip surface when a thrust load occurs due to faulty installation or the like.

  1. CFN
    CFN
    Hexagon Socket on Stud Head
    (Stud Dia. 5 - 12 mm)
Set Ascending Direction