Please use filters to narrow your search
Downloads - Log In required
Stroke (stroke between mechanical stoppers) |
Maximum speed7 (mm/s) |
Dimensions (mm) |
No. of elongated holes |
No. of mounting holes |
Mass (kg) | ||||||||||||||||||||||
Ball screw lead | Outer rail length L0 | G | F | H | D | Q | K | p | n | n1 | Uncovered | Covered | |||||||||||||||
A Type | B Type6 | 6 mm | 10 mm | 20 mm | A Type | B Type | A Type | B Type | |||||||||||||||||||
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | kg | kg | kg | kg | |||||||||
45 (55) | - | 300 (600) | 500 (1000) | 1000 (2000) | 150 | 25 | 100 | 25 | 45 | - | - | 1 | 2 | 2 | 2.2 | - | 2.5 | - | |||||||||
95 (105) | - | 200 | 50 | 100 | 50 | 70 | - | - | 1 | 2 | 2 | 2.6 | - | 2.9 | - | ||||||||||||
195 (205) | 120 (129) | 300 | 50 | 200 | 50 | 70 | - | - | 1 | 3 | 2 | 3.3 | 3.7 | 3.7 | 4.3 | ||||||||||||
295 (305) | 220 (229) | 400 | 50 | 200 | 100 | 70 | - | - | 1 | 4 | 2 | 4 | 4.4 | 4.4 | 5 | ||||||||||||
395 (405) | 320 (329) | 500 | 50 | 200 | 50 | 70 | 400 | 30 | 2 | 5 | 3 | 4.8 | 5.2 | 5.2 | 5.8 | ||||||||||||
495 (505) | 420 (429) | 300 (550) | 500 (920) | 1000 (1780) | 600 | 50 | 200 | 100 | 70 | 500 | 30 | 2 | 6 | 3 | 5.5 | 5.9 | 6 | 6.6 | |||||||||
595 (605) | 520 (529) | 300 (390) | 500 (650) | 1000 (1270) | 700 | 50 | 200 | 50 | 70 | 600 | 30 | 2 | 7 | 4 | 6.2 | 6.6 | 6.7 | 7.3 |
Model No | Ball Screw Lead | Block Type | Direct Coupling Wrapping | Cover1 | Motor mounting plate/ Intermediate flange | Dowel Pin Holes2 | Positioning Metal Bolts3 | Sub-table Greasing Holes4 | Surface Treatment5 (AP-C) |
Low Dust-generating Grease (AFF) |
|||||||
SKR33 | 06 | A | - | 0045 | 0120 | - | 0 | - | 0 | - | 0 | - | 0 | 0 | 0 | 0 | 0 |
SKR33 | 06: 6mm | A: 1 block | A: Type | B: Type | R1: Non-standard side wrapping |
0: Without | P08K/P08D/P08M Q08K/Q08D/Q08M: (Wrapping specifications) |
0: Without | 0: Without |
0: Without | 0: Without |
0: Standard grease (AFA Grease) | |||||
 | 10: 10 mm | B: 2 blocks | 0045: 45 mm | 0120: 120 mm | R2: Standard side wrapping | 1: With |
D: With |
M: With |
G: With |
S: With |
L: Low dust-generating grease (AFF Grease) |
||||||
20: 20 mm | 0095: 95 mm | 0220: 220 mm | R3: Bottom surface wrapping | ||||||||||||||
0195: 195 mm | 0320: 320 mm | ||||||||||||||||
0295: 295 mm | 0420: 420 mm | ||||||||||||||||
0395: 395 mm | 0520 : 520 mm | ||||||||||||||||
0495: 495 mm | |||||||||||||||||
0595: 595 mm | |||||||||||||||||
P: ① Â 08:② Â K:â‘¢
Note 1:
â‘ : Motor mounting plate type
②: Motor shaft diameter (mm)
â‘¢:Motor shaft securing method
Note 2:
K:Key
D:Flat
M:Friction fastener
Note 3:
Figure: Motor shaft securing method
The above selections are Online Store standards. If you need a selection that differs from the standard, please contact us at [email protected]