Please use filters to narrow your search
Downloads - Log In required
Stroke (stroke between mechanical stoppers) |
Maximum speed7 (mm/s) |
Dimensions (mm) |
No. of elongated holes |
No. of mounting holes |
Mass (kg) | |||||||||||||
Ball screw lead | Outer rail length L0 | H | Q | K | p | n | n1 | Uncovered | Covered | |||||||||
A Type | B Type6 | 10 mm | 20 mm | A Type | B Type | A Type | B Type | |||||||||||
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | kg | kg | kg | kg | ||||
190 (208.5) | 80 (98.5) | 500 (1000) | 1000 (2000) | 340 | 70 | - | - | 1 | 3 | 2 | 7.7 | 8.7 | 8.6 | 10 | ||||
290 (308.5) | 180 (198.5) | 440 | 20 | - | - | 1 | 4 | 3 | 9.1 | 10.1 | 10.1 | 11.5 | ||||||
390 (408.5) | 280 (298.5) | 540 | 70 | 360 | 90 | 2 | 5 | 3 | 10.5 | 11.5 | 11.6 | 13 | ||||||
490 (508.5) | 380 (398.5) | 1000 (1980) | 640 | 20 | 460 | 90 | 2 | 6 | 4 | 11.9 | 12.9 | 13.1 | 14.5 | |||||
590 (608.5) | 480 (498.5) | 500 (730) | 1000 (1430) | 740 | 70 | 560 | 90 | 2 | 7 | 4 | 13.3 | 14.3 | 14.6 | 16 | ||||
690 (708.5) | 580 (598.5) | 500 (550) | 1000 (1080) | 840 | 20 | 660 | 90 | 2 | 8 | 5 | 14.7 | 15.7 | 16.1 | 17.5 | ||||
790 (808.5) | 680 (698.5) | 430 | 840 | 940 | 70 | 760 | 90 | 2 | 9 | 5 | 16.1 | 17.1 | 17.6 | 19 |
Model No | Ball Screw Lead | Block Type | Direct Coupling Wrapping | Cover1 | Motor mounting plate/ Intermediate flange | Dowel Pin Holes2 | Positioning Metal Bolts3 | Sub-table Greasing Holes4 | Surface Treatment5 (AP-C) |
Low Dust-generating Grease (AFF) |
|||||||
SKR46 | 10 | A | - | 0190 | 0080 | - | R1 | - | 0 | - | V14M | - | 0 | 0 | 0 | 0 | 0 |
SKR46 | 10: 10 mm | A: 1 block | A: Type | B: Type | R1: Non-standard side wrapping |
0: Without | V14M/Y11M/Y14M: (Wrapping specifications) | 0: Without | 0: Without |
0: Without | 0: Without |
0: Standard grease (AFA Grease) | |||||
 | 20: 20 mm | B: 2 blocks | 0190: 190 mm | 0080: 80 mm | R2: Standard side wrapping | 1: With | D: With |
M: With |
G: With |
S: With |
L: Low dust-generating grease (AFF Grease) |
||||||
0290: 290 mm | 0180: 180 mm | R3: Bottom surface wrapping | |||||||||||||||
0390: 390 mm | 0280: 280 mm | ||||||||||||||||
0490: 490 mm | 0380: 380 mm | ||||||||||||||||
0590: 590 mm | 0480: 480 mm | ||||||||||||||||
0690: 690 mm | 0580: 580 mm | ||||||||||||||||
0790: 790 mm | 0680: 680 mm | ||||||||||||||||
V: ① Â 14:② Â M:â‘¢
Note 1:
â‘ : Motor mounting plate type
②: Motor shaft diameter (mm)
â‘¢:Motor shaft securing method
Note 2:
M:Friction fastener
The above selections are Online Store standards. If you need a selection that differs from the standard, please contact us at [email protected]