Downloads - Log In required
Model No. | Outer dimensions | Block dimensions | Rail dimensions | Basic load rating | ||||||
Radial | ||||||||||
HeightM | WidthW | LengthL | B | C | S x l | Pitch F |
d1xd2xh | Dynamic C |
Static C0 |
|
mm | mm | mm | mm | mm | mm | mm | mm | kN | kN | |
HSR15LC | 24 | 47 | 74.6 | 38 | 30 | M5 | 60 | 4.5x7.5x5.3 | 14.2 | 22.9 |
HSR20LC | 30 | 63 | 90 | 53 | 40 | M6 | 60 | 6x9.5x8.5 | 23.9 | 35.8 |
HSR25LC | 36 | 70 | 102.2 | 57 | 45 | M8 | 60 | 7x11x9 | 35.2 | 51.6 |
HSR30LC | 42 | 90 | 120.6 | 72 | 52 | M10 | 80 | 9x14x12 | 48.9 | 70.2 |
HSR35LC | 48 | 100 | 134.8 | 82 | 62 | M10 | 80 | 9x14x12 | 65 | 91.7 |
Model | Size | Block Type | Block Code*1 | Seal Type*2 | Block Material | |
HSR | 20 | LC | 1 | SS | M | BLOCK |
HSR | 15 | LC | 1 | SS | No Symbol: Standard steel | |
20 | M: Stainless steel | |||||
25 | ||||||
30 | ||||||
35 | ||||||
Note 1: This number is always 1 for interchangeable blocks Note 2: Contamination protection seal SS is standard for Model HSR SS = end seals + side seals + inner seals Note 3: Radial Clearance
Size | Normal | Light Preload |
15 | -4 to +2 | -12 to -4 |
20 | -5 to +2 | -12 to -5 |
25 | -6 to +3 | -16 to -6 |
30 | -7 to +4 | -19 to -7 |
35 | -8 to +4 | -22 to -8 |
45 | -10 to +5 | -25 to -10 |
55 | -12 to +5 | -29 to -12 |
65 | -14 to +7 | -32 to -14 |
The above selections are Online Store standards. If you need a selection that differs from the standard, please contact us at [email protected]