Downloads - Log In required
Model No. | Main dimensions | Shoulder height | Basic load rating | Mass | Mounting hole related | ||||||||||
Inner diameterd | Outer diameterD | Roller pitch circle diameterdp | WidthB | Greasing holed1 | rmin | ds(max) | Dh(min) | Radial | Inner ring | Outer ring | |||||
DynamicratingC | StaticratingC0 | PCD1 | Mounting hole | PCD2 | Mounting hole | ||||||||||
mm | mm | mm | mm | mm | mm | mm | mm | kN | kN | kg | mm | mm | mm | mm | |
RU42 | 20 | 70 | 41.5 | 12 | 3.1 | 0.6 | 37 | 47 | 7.35 | 8.35 | 0.29 | 28 | 6-M3 through | 57 | 6-φ3.4 through φ6.5 counterbore depth 3.3 |
RU66 | 35 | 95 | 66 | 15 | 3.1 | 0.6 | 59 | 74 | 17.5 | 22.3 | 0.62 | 45 | 8-M4 through | 83 | 8-φ4.5 through φ8 counterbore depth 4.4 |
RU85 | 55 | 120 | 85 | 15 | 3.1 | 0.6 | 79 | 93 | 20.3 | 29.5 | 1 | 65 | 8-M5 through | 105 | 8-φ5.5 through φ9.5 counterbore depth 5.4 |
RU124 (G) | 80 | 165 | 124 | 22 | 3.1 | 1 | 114 | 134 | 33.1 | 50.9 | 2.6 | 97 | 10-φ5.5 through φ9.5 counterbore depth 5.4< | 148 | 10-φ5.5 through φ9.5 counterbore depth 5.4 |
RU124X | 80 | 165 | 124 | 22 | 3.1 | 1 | 114 | 134 | 33.1 | 50.9 | 2.6 | 97 | 10-M5 through | 148 | 10-φ5.5 through φ9.5 counterbore depth 5.4 |
RU148 (G) | 90 | 210 | 147.5 | 25 | 3.1 | 1.5 | 133 | 162 | 49.1 | 76.8 | 4.9 | 112 | 12-φ9 through φ14 counterbore depth 8.6 | 187 | 12-φ9 through φ14 counterbore depth 8.6 |
RU148X | 90 | 210 | 147.5 | 25 | 3.1 | 1.5 | 133 | 162 | 49.1 | 76.8 | 4.9 | 112 | 12-M8 through | 187 | 12-φ9 through φ14 counterbore depth 8.6 |
RU178 (G) | 115 | 240 | 178 | 28 | 3.1 | 1.5 | 161 | 195 | 80.3 | 135 | 6.8 | 139 | 112-φ9 through φ14 counterbore depth 8.6 | 217 | 12-φ9 through φ14 counterbore depth 8.6 |
RU178X | 115 | 240 | 178 | 28 | 3.1 | 1.5 | 161 | 195 | 80.3 | 135 | 6.8 | 139 | 12-M8 through | 217 | 12-φ9 through φ14 counterbore depth 8.6 |
RU228 (G) | 160 | 295 | 227.5 | 35 | 6 | 2 | 208 | 246 | 104 | 173 | 11.4 | 184 | 12-φ11 through φ17.5 counterbore depth 10.8 | 270 | 12-φ11 through φ17.5 counterbore depth 10.8 |
RU228X | 160 | 295 | 227.5 | 35 | 6 | 2 | 208 | 246 | 104 | 173 | 11.4 | 184 | 12-M10 through | 270 | 12-φ11 through φ17.5 counterbore depth 10.8 |
RU297 (G) | 210 | 380 | 297.3 | 40 | 6 | 2.5 | 272 | 320 | 156 | 281 | 21.3 | 240 | 16-φ14 through φ20 counterbore depth 13 | 350 | 16-φ14 through φ20 counterbore depth 13 |
RU297X | 210 | 380 | 297.3 | 40 | 6 | 2.5 | 272 | 320 | 156 | 281 | 21.3 | 240 | 16-M12 through | 350 | 16-φ14 through φ20 counterbore depth 13 |
Model | Size | Seals*1 | Radial clearance*2 | Symbol for inner ring thru hole | Symbol for mounting hole orientation |
RU | 124 | UU | CC0 | X | G |
RU | 42 | UU | C0 : Positive Clearance | No Symbol: For sizes 42 to 85, tapped-hole for inner ring | No Symbol: The counterbore holes of the inner and outer rings face the same direction |
 | 66 |  | CC0 : Preload | X: For sizes 124 to 228, tapped-hole for inner ring | G: The counterbore holes of the inner and outer rings face opposite direction |
 | 85 | ||||
 | 124 | ||||
 | 148 | ||||
 | 178 | ||||
 | 228 | ||||
 |  |  |  |  | |
 |  |  |  |  |
Note 1: Contamination protection seal UU is standard for Model RU
Note 2: Radial Clearance
Model No. | CC0 | C0 | ||
Starting torque (N-m) | Radial clearance (µm) | |||
Min. | Max. | Min. | Max. | |
RU42 | 0.1 | 0.5 | 0 | 25 |
RU66 | 0.3 | 2.2 | 0 | 30 |
RU85 | 0.4 | 3 | 0 | 40 |
RU124 | 1 | 6 | 0 | 40 |
RU148 | 1 | 10 | 0 | 40 |
RU178 | 3 | 15 | 0 | 50 |
RU228 | 5 | 20 | 0 | 60 |
The RU clearance CC0 is controlled by starting torque. Starting torque for clearance CC0 does not include seal resistace value. The above selections are Online Store standards. If you need a selection that differs from the standard, please contact us at [email protected]