Downloads - Log In required
Model No. | Outer dimensions | Block dimensions | Rail dimensions | Basic load rating | ||||||
Radial | ||||||||||
Height M |
Width W |
Length L |
B | C | S x l | Pitch F |
d1xd2xh | Dynamic rating C |
Static rating C0 |
|
mm | mm | mm | mm | mm | mm | mm | mm | kN | kN | |
SHS15RM | 28 | 34 | 64.4 | 26 | 26 | M4 x 5 | 60 | 4.5x7.5x5.3 | 14.2 | 24.2 |
SHS25RM | 40 | 48 | 92 | 35 | 35 | M6 x 8 | 60 | 7x11x9 | 31.7 | 52.4 |
Model | Size | Block Type | Block Code*1 | Seal Type*2 | Radial Clearance*3 | Block Material | ||
SHS | 20 | C | 1 | UU | _ |
M | BLOCK | |
SHS | 15 | C | 1 | UU | No Symbol: Normal | No Symbol: Standard steel | ||
20 | V | C1: Light Preload | M : Stainless steel | |||||
25 | R | |||||||
LC | ||||||||
LV | ||||||||
LR | ||||||||
Note 1: This number is always 1 for interchangeable blocks Note 2: Contamination protection seal UU is standard for Model SHS-M UU = end seals
Note 3: Radial Clearance
Size | Normal | Light Preload |
15 | -5 to 0 | -12 to -5 |
20 | -6 to 0 | -12 to -6 |
25 | -8 to 0 | -14 to -8 |
The above selections are Online Store standards. If you need a selection that differs from the standard, please contact us at [email protected]